Call back

Bollards Menu:

Heavy Duty Removable Bollards

The product uses a 125N/B pipe (140mm O/D) for the post with 150N/B pipe for the sleeves

Standard height is 900mm but they can be custom built higher if required for an additional charge

Sleeves are fully Hot Dip Galvanised, giving excellent corrosion resistance.

Sleeves have a hinged lid that finishes completely flush with the concrete surface removing tripping hazards and the accidental loss or theft of a cap that would normally leave a dangerous hole causing liability.

The bollards weigh approximately 17 kg and have a hardened lug that locks through the lid that makes hack sawing of the lug impossible.

Locks remain off the ground and in their correct position (unlike other designs) reducing the likelihood of locks seizing, due to dust being washed into them by rain from being mounted on their side or worse, up side-down

If required I can provide Quality 83/45 Abas Padlocks with all orders, all keyed alike using 1 key on a restricted system.

Please use Part No’s when ordering bollards to save confusion. 

Part No’s

Description

HDRG140

Heavy Duty Removable Galvanised Bollard 140 diameter

HDRPC140

Heavy Duty Removable Powder Coated Bollard 140 diameter

HDRSS150

Heavy Duty Removable Stainless Steel Bollard 150 diameter

Reflective Reflective Tape available add +R on all Part No’s