The product uses a galvanised 90mm high tensile square hollow section as the post
Standard height is 900mm but they can be custom built higher if required for an additional charge
Sleeves are fully Hot Dip Galvanised, giving excellent corrosion resistance.
Sleeves have a hinged lid that finishes completely flush with the concrete surface removing tripping hazards and the accidental loss or theft of a cap that would normally leave a dangerous hole causing liability.
The bollards weigh approximately 17 kg and have a hardened lug that locks through the lid that makes hack sawing of the lug impossible.
Locks remain off the ground and in their correct position (unlike other designs) reducing the likelihood of locks seizing, due to dust being washed into them by rain from being mounted on their side or worse, up side-down
If required I can provide Quality 83/45 Abas Padlocks with all orders, all keyed alike using 1 key on a restricted system.